CIVIL ENGINEERING REQUIREMENTS

 

Civil Engineering Requirements:

Being a good and successful Civil Engineer is not so easy. You need to full some important requirements to achieve this. In this article, I will share the top 10 requirements to be a successful civil engineer.

1. Tests Of Building Materials:

A good civil engineer should have proper knowledge of different tests of building materials. Some important tests are listed below.

Concrete Test: Slump test, compression test, split tensile test, soundness, etc.

Soil Test: Core cutter test, compaction test, sand replacement test, triaxial test, consolidation test, etc.

Bitumen Test: Ductility test, softening point test, gravity test, penetration test, etc.

2. Investigation Of soil:

Various soil tests are conducted to determine the settlement and stability of soils before starting construction. So as a civil engineer, you should have enough knowledge of these tests which are performed at the site.

3. Uses Of Surveying Instruments:

Usages of surveying instruments like the total station, theodolite, etc are also mandatory knowledge for every civil engineer. These instruments are used for marking and measurements.

4. Standard Codes Used In Construction:

Every country has its standard safety specifications (eg: Is Code) for construction-related works. All new construction should be done by following all the rules and procedures mentioned in the standard codes. Otherwise, the chances of failure of a structure will be always high.

5. Bar Bending Schedule:

Bar bending schedule is an essential chart for civil engineers. It provides the reinforcement calculation of RC beam such as cutting length, type of bending, the length of bending, etc.

Comments

Post a Comment

Popular posts from this blog

NOTCHES AND WEIRs

Image
   NOTCH ,WEIR AND ITS TYPES Notch A  notch  may be defined as an obstruction over which the flow of liquid occurs   In case of measuring tank or reservoir, the opening is provided at the side of the tank such that the liquid surface in the tank is below the top edge of the opening. Weir A  weir  is a notch on a large scale used for measuring the flow of a river, canal etc. It is a concrete or masonry structure of substantial breadth built across the river in the direction of flow. This allows the excess water to flow over its entire length to the downstream side. Thus a weir is similar to a small dam constructed across the river, with a difference that the excess water flows downstream only through a small portion called  spillway  and in case of weir, the excess water flows over its entire length. Nappe and crest The sheet of water flowing through a notch or over a weir is known as  nappe  or  vein . The bott...
Read more

THE BASICS OF REBAR: A COMPREHENSIVE GUIDE FOR BEGINNERS

Image
 THE BASICS OF REBAR: A COMPREHENSIVE GUIDE FOR BEGINNERS The Basics of Rebar If you have ever wondered what gives strength and stability to the concrete structures that we see around us, the answer is (most commonly) rebar. Rebar, short for reinforcing bar, is the steel rods that are embedded in concrete that provide tensile strength to what is actually and prevent cracking. Rebar comes in different shapes and sizes, but the most common type is deformed steel rebar, which has ridges or indentations along its surface to create a better bond with the concrete. Deformed steel rebar has been used in the construction industry for over a century, and it has revolutionised the way we build. With rebar, and using elements such as beams,  beam ties , rebar mesh, and reinforced walls, we can create taller, stronger, and more durable structures that can withstand natural disasters, environmental changes, and human activities. Some of the most iconic buildings in the world, such as...
Read more

What are different diameters of steel used in construction field?

         In the construction industry, the appropriate selection of materials is crucial as they form            the fundamental basis for determining the strength and durability of structures. TMT (Thermo-Mechanically Treated) Steel is one of the essential components in construction as it stands out for its exceptional strength and ductility in building structures. Thus, contributing to the prolonged longevity and durability of the structures. In this article, we will delve into the different sizes of  TMT steel bars  and their different uses in the construction industry. These TMT Steel bars come in different sizes based on their varied diameters. The different diameter of steel bars are as follows: 8mm Steel Rod 10mm Steel Rod 12mm Steel Rod 16mm Steel Rod 20mm Steel Rod 25mm Steel Rod 32mm Steel Rod, etc TMT bars of varied sizes, play a pivotal role in diverse infrastructure initiatives, the versatility of TMT bars is ...
Read more