Water treatment steps

 

Public drinking water systems use different water treatment methods to provide safe drinking water for their communities. Public water systems often use a series of water treatment steps that include coagulation, flocculation, sedimentation, filtration, and disinfection.

    

 Water treatment steps

Coagulation

Coagulation is often the first step in water treatment. During coagulation, chemicals with a positive charge are added to the water. The positive charge neutralizes the negative charge of dirt and other dissolved particles in the water. When this occurs, the particles bind with the chemicals to form slightly larger particles. Common chemicals used in this step include specific types of salts, aluminum, or iron.

Flocculation

Flocculation follows the coagulation step. Flocculation is the gentle mixing of the water to form larger, heavier particles called flocs. Often, water treatment plants will add additional chemicals during this step to help the flocs form.

Sedimentation

Sedimentation is one of the steps water treatment plants use to separate out solids from the water. During sedimentation, flocs settle to the bottom of the water because they are heavier than water.

Filtration

Once the flocs have settled to the bottom of the water, the clear water on top is filtered to separate additional solids from the water. During filtration, the clear water passes through filters that have different pore sizes and are made of different materials (such as sand, gravel, and charcoal). These filters remove dissolved particles and germs, such as dust, chemicals, parasites, bacteria, and viruses. Activated carbon filters also remove any bad odors.

Water treatment plants can use a process called ultrafiltration in addition to or instead of traditional filtration. During ultrafiltration, the water goes through a filter membrane with very small pores. This filter only lets through water and other small molecules (such as salts and tiny, charged molecules).

Reverse osmosisexternal icon is another filtration method that removes additional particles from water. Water treatment plants often use reverse osmosis when treating recycled waterexternal icon (also called reused water) or salt water for drinking.

Disinfection

After the water has been filtered, water treatment plants may add one or more chemical disinfectants (such as chlorine, chloramine, or chlorine dioxide) to kill any remaining parasites, bacteria, or viruses. To help keep water safe as it travels to homes and businesses, water treatment plants will make sure the water has low levels of the chemical disinfectant when it leaves the treatment plant. This remaining disinfectant kills germs living in the pipes between the water treatment plant and your tap.

In addition to or instead of adding chlorine, chloramine, or chlorine dioxide, water treatment plants can also disinfect water using ultraviolet (UV) light pdf icon  and ozone work well to disinfect water in the treatment plant, but these disinfection methods do not continue killing germs as water travels through the pipes between the treatment plant and your tap.

Water treatment plants also commonly adjust water pH and add fluoride after the disinfection step. Adjusting the pH improves taste, reduces corrosion (breakdown) of pipes, and ensures chemical disinfectants continue killing germs as the water travels through pipes. Drinking water with the right amount of fluoride keeps teeth strong and reduces cavities.

Surface water collects on the ground or in a stream, river, lake, reservoir, or ocean.

Comments

Post a Comment

Popular posts from this blog

NOTCHES AND WEIRs

Image
   NOTCH ,WEIR AND ITS TYPES Notch A  notch  may be defined as an obstruction over which the flow of liquid occurs   In case of measuring tank or reservoir, the opening is provided at the side of the tank such that the liquid surface in the tank is below the top edge of the opening. Weir A  weir  is a notch on a large scale used for measuring the flow of a river, canal etc. It is a concrete or masonry structure of substantial breadth built across the river in the direction of flow. This allows the excess water to flow over its entire length to the downstream side. Thus a weir is similar to a small dam constructed across the river, with a difference that the excess water flows downstream only through a small portion called  spillway  and in case of weir, the excess water flows over its entire length. Nappe and crest The sheet of water flowing through a notch or over a weir is known as  nappe  or  vein . The bott...
Read more

THE BASICS OF REBAR: A COMPREHENSIVE GUIDE FOR BEGINNERS

Image
 THE BASICS OF REBAR: A COMPREHENSIVE GUIDE FOR BEGINNERS The Basics of Rebar If you have ever wondered what gives strength and stability to the concrete structures that we see around us, the answer is (most commonly) rebar. Rebar, short for reinforcing bar, is the steel rods that are embedded in concrete that provide tensile strength to what is actually and prevent cracking. Rebar comes in different shapes and sizes, but the most common type is deformed steel rebar, which has ridges or indentations along its surface to create a better bond with the concrete. Deformed steel rebar has been used in the construction industry for over a century, and it has revolutionised the way we build. With rebar, and using elements such as beams,  beam ties , rebar mesh, and reinforced walls, we can create taller, stronger, and more durable structures that can withstand natural disasters, environmental changes, and human activities. Some of the most iconic buildings in the world, such as...
Read more

What are different diameters of steel used in construction field?

         In the construction industry, the appropriate selection of materials is crucial as they form            the fundamental basis for determining the strength and durability of structures. TMT (Thermo-Mechanically Treated) Steel is one of the essential components in construction as it stands out for its exceptional strength and ductility in building structures. Thus, contributing to the prolonged longevity and durability of the structures. In this article, we will delve into the different sizes of  TMT steel bars  and their different uses in the construction industry. These TMT Steel bars come in different sizes based on their varied diameters. The different diameter of steel bars are as follows: 8mm Steel Rod 10mm Steel Rod 12mm Steel Rod 16mm Steel Rod 20mm Steel Rod 25mm Steel Rod 32mm Steel Rod, etc TMT bars of varied sizes, play a pivotal role in diverse infrastructure initiatives, the versatility of TMT bars is ...
Read more